MECHANICAL, ROTATING HVAC EQUIPMENT INFRARED THERMAL IMAGING SURVEY SERVICES

Aitur Group Ltd provides mechanical, rotating, HVAC, plumbing equipment maintenance infrared image inspection, tank level IR survey, pump and compressor hot spots thermal imaging testing services.

Our Flir Level 1& 2 certified infrared inspections and testing, IR scanning, thermal imaging survey services include mechanical, HVAC, rotating equipment (motor, pumps, compressors, fans…), heater, cold storage and tank, vessel, silos level measurement. The company affordable cos-effective services are available in Metro Vancouver, BC, including North, West Vancouver, Richmond, Burnaby, New Westminster, Surrey, Delta, Abbotsford, Coquitlam, Langley, Port Coquitlam and Port Moody.

There are no doubts that any building, mechanical, rotating, HVAC (Heating, Ventilation, and Air Conditioning) equipment and major components could have invisible or hidden problems. In mechanical systems and rotating equipment hot spots or excessive heat indicates a hidden problem. High temperature shows an excessive mechanical friction, electrical resistance, damaged mechanisms, lubrication deficiencies, or other common problems that can lead to costly repair or critical equipment failure. Unplanned stops or equipment shutdowns require time, money and labors to fix the problems.

Walk-in cooler digital and Infrared images.

cooler.jpg

Obvious insulation deficiency and cooling losses in a large walk-in cooler

The thermal imaging survey/inspections leverage Preventive/Predictive Maintenance Services and help to prevent /avoid many troubles. Using a high sensitive calibrated Flir thermal camera and quick report software, our certified infrared surveyors can detect/pinpoint the systems deficiencies, analyse on site taken IR /DC images, and identify the causes of the problem quickly. We can identify overheating /hot spots of bearings, shafts, couplings, and belts or other components on HVAC, mechanical or rotating equipment. 

We provide a full PDF format report, including problem description and analysis, digital and thermal /infrared images; cause of the trouble and our recommendations.  

Rotating equipment used to transfer/move different kind of products such as the liquid, gas and solids. Main type of rotating equipment could be as the follows:

  • Driven equipment types: Compressors, Pumps, Extruders, Mixers and Fans.
  • Drivers or Movers: gas or steam turbines , ac/dc motors; gas/diesel engines
 

 

joint.jpg

Overheating joint..

Different class electrical motor suggested temperature rating guidelines.

rating guidelines.jpg

Tank, Vessel and Silos Level Measurement.

Infrared Scanning or thermal imaging survey often used not only for a level measurement, but to also to measure the volume of material or liquid in a vessel, silos or a tank. Level measuring and level controlling is vital for safety of different type of reservoirs and overflows and spill prevention of tanks, vessel and silos.

tank.jpgLevel of the tank can be seen easily on the IR Image. tanks.jpgDifferent Levels in two tanks: Left tank is full while center tank is not.
   

Contact us to book your inspection today!